Dew point temperature is a key indicator of high water vapour in compressed air systems. If the dew point temperature is the same as the temperature of the compressed air, water vapour will condense and there will be unwanted water in the compressed air lines. This causes erosion, corrosion and freezing and can adversely affect product quality during production processes. A batch of product may even be rejected due to contamination, resulting in increased costs. As the pressure increases the dew point temperature rises and approaches saturation. It is important to measure dew point precisely and reliably.
Rotronic has developed a low dew point stainless steel probe (HC2-LDP series) with screw-in connector for measurement down to -60°Cdp in industrial processes at up to 100 bar; it is very suitable for compressed air systems and dryers. The probe provides stable measurements and is fully compatible with Rotronic measurement transmitters, handhelds and the continuous monitoring system (RMS). Measurement chambers with a defined air flow and a quick connector for optimum dew point measurement are available. Monitoring and control of dew point is easily possible, improving system efficiency and eliminating the possibility of product contamination. A technical datasheet is available on the website.
The Rotronic BF220 absolute pressure transmitter with piezo-resistive steel sensor, robust stainless steel housing and ½”G fitting is ideal for measurement in compressed air lines as well as neutral gases and nitrogen in piping and closed vessels. It is suitable for applications with fast temperature changes. The transmitter has a measurement range of 0-10 bar. A technical datasheet is available on the website.
www.rotronic.co.uk | instruments@rotronic.co.uk | 01293 571000