Ahlstrom-Munksjö is one of the world’s leading players in sustainable and innovative fiber-based solutions. In connection with an annual shut-down at the company’s Billingsfors pulp and paper mill in Sweden, Sulzer delivered its first SALOMIX SSF agitator for the swell tank. The agitator was installed in January 2020
The challenge
The swell tank is located before the final refiners, just ahead of the headbox. Therefore, high reliability, good mixing performance and energy efficiency are key requirements for the agitator. The stock consistency is normally 3.2% with various kraft pulp types.
The solution
The SALOMIX SSF agitator demonstrated steady performance in the world’s first installation right from start-up. It was installed in the swell tank, replacing an old SALOMIX SLF agitator. The new agitator is equipped with a high-efficiency EX3 propeller, which has lowered power consumption by 10% versus the previous SALOMIX agitator with an MX4 impeller. The seal solution is water free, using Sulzer’s grease-lubricated double mechanical seal SAC2G.
“The agitator has been running very smoothly ever since start-up. The power consumption has been reduced by about 10% with the EX3 propeller compared to the previous one”, said Michael Pettersson, Maintenance Engineer at Ahlstrom-Munksjö Billingsfors.
Customer benefit
The higher propeller efficiency can be utilized either for energy savings or for increasing the production capacity.
- high reliability and smooth operation
- water-free mechanical seal
- compact installation
- possibility to achieve more power savings if blade angle is reduced
Product data
Agitator model: SALOMIX SSF60-80L with 11 kW motor
Propeller: EX3-800
Power savings: Approximately 10% and 1 kW versus the previous SALOMIX installation with MX4 propeller
Seal type: double mechanical with grease lubrication Sulzer SAC2G
Read more about the SALOMIX family.
Follow Sulzer Industry on LinkedIn.
www.sulzer.com